Home
Accessories for Surface Finish

Filters

Bowers (1)
Diavite (20)
MHC (1)
Mitutoyo (140)
Rubert (13)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (207)
Workshop Tools & Gauges (1)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (3)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)

Accessories for Surface Finish

216 products

Showing 37 - 72 of 216 products

Display

Sort by

View

Mitutoyo Mitutoyo 998291 Precision V-block for XY levelling table (workpiece ø1 - ø160 mm)

Sale price€977,50

Mitutoyo Mitutoyo Cross-travel Table (mm) - 218-041

Sale price€2.510,00

Mitutoyo Mitutoyo 178-016 Levelling Table

Sale price€749,00

Mitutoyo Mitutoyo Cross-travel Table (mm) -- Table top: 280x180mm, XY travel: 100x50mm 218-001

Sale price€2.350,00

Mitutoyo Mitutoyo Digital Levelling Table (mm) - 178-042-1

Sale price€3.650,00

Mitutoyo Mitutoyo 178-053-1 XY levelling table 1 x 1" (tilting: ±1.5°, max. loading: 15 kg, swivelling: ±3°

Sale price€2.830,00

Mitutoyo Mitutoyo Three-Axis Adjustment Table - 178-047

Sale price€4.330,00

Mitutoyo Mitutoyo 178-043-1 XY levelling table (25 x 25 mm) (tilting: ±1.5°, max. loading: 15 kg, swivelling: ±3°)

Sale price€2.830,00

Mitutoyo Mitutoyo Three-Axis Adjustment Table - 178-047

Sale price€4.330,00

Mitutoyo Roughness specimen Ra 0,4/Ra3µm[inch/mm] 178-607

Sale price€206,25

Mitutoyo Roughness specimen Ra 1µm [inch/mm] 178-606

Sale price€335,00

Mitutoyo Roughness specimen Ra 1µm [mm] 178-605

Sale price€675,00

Mitutoyo Roughness specimen Ra 0,4 / Ra 3µm [mm] 178-604

Sale price€390,00

Mitutoyo Printer set for SJ-210 with cable and battery 178-421D

Sale price€1.375,00

Mitutoyo Detector 4mN for Surftest; Formtracer SV-C 178-397-2

Sale price€1.028,75

Mitutoyo Low Pressure Detector for SJ201/301 (0.75mN) 178-395

Sale price€727,50

Mitutoyo Detector for soft materials 10µm; 4mN for SJ-210 / SJ-310 series 178-391

Sale price€727,50

Mitutoyo Standard detector 5µm; 4mN for SJ-210 / SJ-310 series 178-390

Sale price€727,50

Mitutoyo Std.Detector For Suf.501 178-380

Sale price€1.387,50

Mitutoyo Leveling Table Leveling range +/- 1,5° 178-195

Sale price€880,00

Mitutoyo Vibration isolator wide base 178-189

Sale price€15.800,00

Mitutoyo Vibration isolator standard base 178-188

Sale price€11.862,50

Mitutoyo Digimatic XY travel+leveling table[inch] Travel +/-0,5"; Leveling range +/-1,5° 178-186

Sale price€3.187,50

Mitutoyo Digimatic XY travel + leveling table[mm] Travel +/-12,5mm; Leveling range +/-1,5° 178-185

Sale price€2.837,50

Mitutoyo travel + leveling table [inch] Travel +/-0,5"; Leveling range +/-1,5° 178-184 XY

Sale price€2.850,00

Mitutoyo XY travel + leveling table [mm] Travel +/-12,5mm; Leveling range +/-1,5° 178-183

Sale price€3.325,00

Mitutoyo Side table 178-181

Sale price€3.725,00

Mitutoyo Detector holder S3000CR-D set for Formtracer Avant series 178-142

Sale price€4.787,50

Mitutoyo Y-axis table for Surftest SV, Contracer, Formtracer 178-097

Sale price€12.837,50

Mitutoyo 3D Y-axis table for Formtracer Avant / CS-3300 series 178-096

Sale price€14.162,50

Mitutoyo Granite stand 400x250x578mm for Surftest SJ-500 178-089

Sale price€2.212,50

Mitutoyo 2D Auto-Leveling Table for Surftest SV, Contracer, Formtracer 178-087

Sale price€4.337,50

Mitutoyo Granite stand 600x450x710mm for Surftest SJ-500 178-085

Sale price€5.537,50

Mitutoyo Theta-2 axis Rotary Axis 178-078

Sale price€6.587,50

Mitutoyo Rotary type detector holder S-3000AR for SV-M3000CNC 178-073

Sale price€35.650,00

Mitutoyo Long type detector holder S-3000L for SV-M3000CNC 178-072

Sale price€2.675,00

123 4…6

Page 2 / 6Next

Filters (0)

Filters

Bowers (1)
Diavite (20)
MHC (1)
Mitutoyo (140)
Rubert (13)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (207)
Workshop Tools & Gauges (1)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (3)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)