Home
Accessories for Surface Finish

Filters

Bowers (1)
Diavite (20)
MHC (1)
Mitutoyo (140)
Rubert (13)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (207)
Workshop Tools & Gauges (1)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (3)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)

Accessories for Surface Finish

216 products

Showing 1 - 36 of 216 products

Display

Sort by

View

Rubert Rubert R-130 Comparisson Kits Description : Rubert comparisson kit

Sale price€130,00 Regular price€225,00

Rubert Rubert R-130 Comparisson Kits Description : Rubert comparisson kit

Sale price€130,00 Regular price€225,00

Diavite Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5

Sale price€1.150,00

Diavite Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5

Sale price€1.350,00

Diavite Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5

Sale price€1.250,00

Diavite Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5

Sale price€1.050,00

Diavite Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2

Sale price€1.150,00

Diavite Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5

Sale price€1.550,00

Diavite Diavite Tracer KKH with skid, concave/vex surface, 8 mm, 5 µm/90° for VH/VHF, Article code: KKH-08/10/90/5

Sale price€1.190,00

Diavite Diavite Tracer TH with skid for depth measurement 140 mm, 5 µm/90° for VH/VHF, TH-140/10/90/5

Sale price€1.695,00

Diavite Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid

Sale price€750,00 Regular price€938,00

Diavite Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5

Sale price€1.190,00

Diavite Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid

Sale price€885,00

Diavite Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2

Sale price€1.350,00

Diavite Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm

Sale price€1.275,00

Diavite Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm

Sale price€1.095,00

Diavite Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep

Sale price€960,00

Diavite Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm

Sale price€995,00

Diavite Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires

Sale price€1.250,00

Diavite Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL

Sale price€850,00

Diavite Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm

Sale price€1.010,00

Diavite Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm

Sale price€1.150,00

Rubert R-335 Honing Description : Rubert Honing Comparator Number of patches : 6 Range of Roughness Ra Microns : 0.05-1.6 microns Range of roughness Rz in microns : 0.25-10.0 microns N-groups : 2-7

Rubert Rubert R-335 Honing Description : Rubert Honing Comparator Number of patches : 6 Range of Roughness Ra Microns : 0.05-1.6 microns Range of roughness Rz in microns : 0.25-10.0 microns N-groups : 2-7

Sale price€69,00 Regular price€86,00

Rubert R-318 Cylindrical Lapping and Superfinishing Comparator Description : Rubert Cylindrical lapping + Superfinishing Comparator Number of patches : 4 4 Range of Roughness Ra Microns : 0.025-0.2 microns 0.025-0.2 microns Range of roughness Rz

Rubert Rubert R-318 Cylindrical Lapping and Superfinishing Comparator Description : Rubert Cylindrical lapping + Superfinishing Comparator Number of patches : 4 4 Range of Roughness Ra Microns : 0.025-0.2 microns 0.025-0.2 microns Range of roughness Rz

Sale price€69,00 Regular price€86,00

Rubert R-317 Flat Lapping Comparator Description : Rubert Flat lapping & Criss-cross/parallel Comparator Number of patches : 4 Flat lapping Criss-cross 4 parallel Range of Roughness Ra Microns : 0.025-0.2 microns 0.025-0.2 microns Range of roughness Rz

Rubert Rubert R-317 Flat Lapping Comparator Description : Rubert Flat lapping & Criss-cross/parallel Comparator Number of patches : 4 Flat lapping Criss-cross 4 parallel Range of Roughness Ra Microns : 0.025-0.2 microns 0.025-0.2 microns Range of roughness Rz

Sale price€69,00 Regular price€86,00

Rubert R-316 Cylindrical Grinding Comparator Description : Rubert Cylindrical Grinding Comparator Number of patches : 8 Range of Roughness Ra Microns : 0.025 3.2 microns Range of roughness Rz in microns : 0.25-16 microns N-groups : 1-8

Rubert Rubert R-316 Cylindrical Grinding Comparator Description : Rubert Cylindrical Grinding Comparator Number of patches : 8 Range of Roughness Ra Microns : 0.025 3.2 microns Range of roughness Rz in microns : 0.25-16 microns N-groups : 1-8

Sale price€69,00 Regular price€86,00

Rubert R-120 Cylindrical Turning Comparator Description : Rubert Cylindrical Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Rubert Rubert R-120 Cylindrical Turning Comparator Description : Rubert Cylindrical Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Sale price€220,00 Regular price€275,00

Rubert R-119 Face Turning Description : Rubert Face Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Rubert Rubert R-119 Face Turning Description : Rubert Face Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Sale price€220,00 Regular price€275,00

Rubert R-115 Surface Grinding Comparator Description : Rubert Surface Grinding Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 1-125 micro" Range of roughness Ra in microns : 0.025-3.2 microns N-groups : 1-8

Rubert Rubert R-115 Surface Grinding Comparator Description : Rubert Surface Grinding Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 1-125 micro" Range of roughness Ra in microns : 0.025-3.2 microns N-groups : 1-8

Sale price€220,00 Regular price€275,00

Rubert Rubert 542X sinusoidal specimen Ra = 0.06 µm = 2.36 µ in

Sale price€320,00 Regular price€400,00

Rubert Rubert 530E sinusoidal specimen Ra = 1.0 ìm Description : sinusoidal specimen Ra = 1.0 μm

Sale price€299,00 Regular price€374,00

Rubert Rubert 504E Random surface finish gauge Description : Random profile specimen Ra = 0.15 μm

Sale price€410,00 Regular price€513,00

Rubert Rubert 501E random profile specimen Description : Random profile specimen Ra = 0.02 μm

Sale price€374,00 Regular price€468,00

MHC MHC 630-9900 Comparison Kits Description 30 Specimen Inch/Metric Surface Roughness Comparator

Sale price€125,00 Regular price€156,00

Mitutoyo Calibration Stage for Surftest SJ/SV, Contracer, Formtracer Item number: 12AAG175

Sale price€470,06

Mitutoyo Mitutoyo Calibration Stand - 12AAM100

Sale price€1.681,88

12 3…6

Page 1 / 6Next

Filters (0)

Filters

Bowers (1)
Diavite (20)
MHC (1)
Mitutoyo (140)
Rubert (13)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (207)
Workshop Tools & Gauges (1)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (3)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)